top of page

Please read information below. Thank you

What size do I need?

Please check the tyre for the size imprinted. It would normally be in the format of 3.00-5 or 4.10/3.50-4 or 200x50. Please do not try to measure the tyre and guess the size, as for the tube sizing the ballon diameter would be the same for some wider or profiled tires.

Installing
Please check carefully the tyre inside before refitting the tube, looking for anything sharp embedded which very often is the reason for the puncture in the first place. Please the valve inside the hole in the rim, and slowly fit the tyre over starting with fitting one edge over the rim edge and then the other edge, try to keep them lubricated with silicone spray or vaseline. Do not use screwdrivers or sharp objects, and before inflating, make sure the tube is not trapped between the edge of the tyre and the edge of the rim. 

Testing
When tubes arrive please do not try to inflate them to any pressure. Inner tube can only be pressurised inside the tyre, on it's own the tube will increase it's volume and keeps expanding like a ballon to the bursting point. If you insisting on checking the tube, please inflate gently, so it is still soft to touch, and place under the water for few seconds. If for some reason ther is a leak from the valve, please tighten the inner valve clockwise.


Our tubes:

Great for mobility scooters!

Garden equipment.

Industrial equipment

bottom of page